Additional flooring for the VIRASTAR PROFI 2.0x2.0 m scaffolding
Additional flooring for the VIRASTAR PROFI scaffolding tower has the following dimensions: 2.0x0.2 m.
Additional flooring for the VIRASTAR PROFI 2.0x2.0 m scaffolding tower to create a working platform at a height:
- Area of additional flooring: 0.2x2.0 m;
- The flooring frame is made of steel;
- The frame is powder-painted to protect against corrosion;
- Floor material: moisture-resistant anti-slip plywood;
- The scaffolding tower can be used both indoors and outdoors;
- The flooring can be installed at the desired height by hooking it onto the crossbars;
- Additional flooring for the VIRASTAR PROFI 2.0x2.0 m scaffolding tower is necessary to create a continuous working platform;
- The scaffolding tower has a DSTU certificate of conformity;
- Made in Ukraine.
Add a review
Revised
Set of wedge-clamp scaffolding 17.5x21 (M) VIRASTAR
A set of wedge-clamp scaffolding 17.5x21 (M) VIRASTAR with an area of 367.5 sq. m. The width of the flooring is 0.7 m, the step of the ladder racks along the wall is 3.5 m.
Tower VIRASTAR "OPTIMA" 14+1, flooring 1.2x2.0 m
Tower VIRASTAR "OPTIMA" 14 + 1, flooring 1.2x2.0 m. The height of the tower is 18.3 m. It is used in construction, finishing, installation or other work where lifting to a height is required.
PROFITEC VIRASTAR tower, working height 4,91 m
Tower PROFITEC VIRASTAR working height 4,91 m, tower height 3,91 m, platform height 2,91 m, area 1.35x2.0 m.
PROFITEC VIRASTAR tower, working height 14.21 m
Tower PROFITEC VIRASTAR working height 14.21 m, tower height 13.23 m, platform height 12.21 m, area 1.35x2.0 m.