A ladder or a tour tower - what to choose for work?
When standing on a ladder, you will be limited in your movements, as a strong deviation to the side can cause the ladder to fall. And on the tour tower, you will be able to take a few steps to the side on the work site. The construction of the tour tower is stable, and fixed by stabilizers, it is safe even for work at a great height. You will be able to work much longer on a tour tower than on a ladder.
How to prevent unauthorized access to your scaffolding
Scaffolding can attract outsiders. It is necessary to limit the access of outsiders both when the workers are not on the scaffolding and when they are there, but are busy with work and cannot see that any outsider is trying to climb the scaffolding.
Advantages of aluminum as a material for the production of stepladders
Aluminum stepladders are lighter than others, their surface is not destroyed by corrosion due to the protective natural layer of aluminum oxide, the prices of aluminum stepladders are quite acceptable due to the wide distribution of this element in nature. In addition, in the event of sparks, an aluminum stepladder will not be damaged like a wooden one.
Which towers are suitable for repairing schools?
Each school carries out renovations annually during the summer holidays, when the children are not in school. In some schools, desks are painted, in some - walls, in others - sports and assembly halls are repaired.
How can you not use a ladder?
Go up and down the ladder always face the steps, do not reach too far to the side. Unfold the stepladder completely. Place the attachment ladder at an angle of 65-75º.
Monolithic construction - how buildings are erected
A monolithic building is erected floor by floor, pouring the concrete mixture into the formwork, tying the reinforcement, waiting for the concrete to harden, and again installing the wall formwork and pouring concrete into it. Such a structure has no seams, joints, or gaps. Buildings built in this way are allowed to be built even in seismically dangerous zones.
Universal ladders - what are their multitasking and advantages?
The aluminum three-section ladder is universal - it is used for work in the garden, on the construction site, for repair, maintenance of billboards. This is a sought-after high-altitude equipment both for professionals and for home use.
Formwork racks - why and how are they used?
The calculation of the number of racks of the formwork is performed based on the area of the room. Reinforced racks are used when making an overlap of considerable thickness or at a long distance between the racks. The recommended distance between formwork racks is 150 cm.
10 professions where ladders are used
At the enterprise, equipment that is vital for production must be repaired as a matter of urgency. As a rule, machines and other units are quite high, and a stepladder is necessary for their repair. Aluminum two-sided ladders allow the debugger to take a comfortable position to repair the equipment.